乳头疼是怎么回事一碰就疼,狠狠五月色婷婷蜜桃潮喷,一起嗟嗟嗟免费观看短片,女人大荫蒂毛茸茸视频

There are many points to be noted in the selection of the reactor mixer, but the most important thing is that the selection result is reasonable and the selection method is simple. The selection and classification of the reactor mixer will be described below.

For the choice of reactor mixer, the most basic method is to select the viscosity according to the viscosity of the stirring medium, because the viscosity of the liquid has a great influence on the stirring state. Different mixers have different application ranges. According to different viscosity mixers, they can be divided into propulsion, turbine, slurry, anchor and ribbon. Among them, the slurry type has the advantage of simple structure, and the baffle can improve the flow pattern. Generally, the slurry type can be selected when the viscosity is low. The other type of wheel also has many advantages, and it is also the most widely used type of pulp.

In the selection of the reactor mixer, there is also a method of distinguishing from the flow state caused by the machine according to the purpose of the agitation. Generally, the slurry type of the reactor can be divided into two types, a fast type and a slow type. The two types are different in the state operation, the former is operated in a turbulent state, and the latter is operated in a laminar flow state. It can be decided according to the purpose of mixing when it is selected.

According to the specific conditions of use, the choice of the reactor mixer can be selected not only according to the type of slurry and mixing, but also the recommended range of medium viscosity, range of stirring speed and range of tank capacity.

Understand the choice of reactor mixer, let's introduce its classification:

1. According to the blade stirring structure, it can be divided into flat leaf, oblique leaf, curved leaf and spiral surface agitator. According to the installation requirements of the agitator, it can be divided into a whole type and a split type.

2. According to the application of the agitator, it can be divided into two types: a low viscosity fluid agitator and a high viscosity fluid agitator. Among them, which can be used for low-viscosity fluids, such as propulsion type, slurry type, open turbine type, plate frame type, and three-leaf type. Can be used for high viscosity fluids: anchor, frame, propeller, ribbon and so on.

3. The kettle agitator can also be divided into two types, namely an axial flow agitator and a radial flow agitator, which are distinguished according to the fluid form of the agitator.

Through the above introduction, have you got a certain understanding of the selection and classification of the reactor mixer? Xinruidu is very professional in the development of the kettle agitator, if you need to contact us!